Custom OffGrid Photovoltaic Energy Storage System

Nov 12, 2026

Leave a message

Simon He
Simon He
This is Simon from MX-PCBA. I am a dedicated sales professional specializing in PCBA (Printed Circuit Board Assembly), Box Build, and Wire Harness/Cable Assembly solutions.

Background

This custom off-grid solar energy storage solution is designed for under-developed remote areas lacking public grid access. Grid construction is expensive or impossible locally. The system harvest solar energy and stores power in battery, to power LED lighting, DC fan and USB small devices for daily basic living power supply, with low-cost, robust performance for harsh field environment.

Typical use cases: remote villages, desert, coastal off-grid zones and emergency disaster relief.

Customer Requirements

100% off-grid standalone operation, integrate solar charging & battery energy management

Drive DC LED bulbs, DC fan and USB 5V charging port simultaneously

Wide temperature tolerance for outdoor harsh climate

Simple assembly & local-friendly installation

Full kit including PV panel, energy storage host, fan and LED lamps.

Our Solution

We delivered a complete custom system: monocrystalline PV panel collects solar power; energy-storage controller integrates charge management, battery protection and multi-channel DC output. PV panel installs in direct sunlight area, while the storage unit is kept indoors away from sun exposure. It provides DC12V output for fan & bulbs, DC5V USB for mobile devices.

news-650-420

System Specification

PV Module

Max Power(Pmax):185W

Max Power Voltage(Vmp):19.14V

Module Efficiency:25%

Max System Voltage:1000V DC

Operating Temp:-40℃ ~ +85℃

Dimension:1230×670×30mm

news-608-364

Energy Storage Controller Unit

Cell Capacity:15AH

Battery Voltage:12.8V

Output: DC12V for fan & lamp; DC5V-USB

Operating Temp:-30℃ ~ +55℃ (avoid direct sunlight)

Load runtime: Fan>6H; Bulb>8H

Dimension:260×135×228mm

news-536-494news-274-348

Terminal Loads - LED Lamp:5W DC12V - DC Fan:15W DC12V - USB Output: DC5V for small electronics

Standard Kit List:1×180W PV panel, 1×energy storage host, 3×LED bulbs,1×DC fan

Key Benefits

Fully off-grid renewable power, no utility grid required, cut high diesel-generator cost

Wide temperature range, reliable for desert, coastal and high-altitude remote locations

All-in-one control unit: solar charge, battery protection, multi-load DC output; no extra inverter needed for lower BOM cost

Guaranteed runtime for night-time basic household usage

Modular & easy-to-install; LED display & indicator lights for simple status monitoring

Multi-function outputs: lighting, ventilation fan & mobile-phone charging to cover essential domestic power needs.

Application

- Off-grid remote village household power supply - Desert / coastal island sites - Emergency disaster-response power supply - Rural electrification & low-income community aid projects

Conclusion

This tailored off-grid photovoltaic energy storage solution is cost-optimized for power-short communities, meeting basic needs of lighting, ventilation and phone-charging.

MX-PCBA offers full custom service including concept design, PCBA manufacturing, system integration and mechanical coordination. We can adjust PV power, battery capacity and I/O ports according to local sunlight condition and customer load requirements.

Contact us for your custom energy-storage project.

Send Inquiry

Applications

img
Aerospace Field
img
Automatic Electronics
img
Communication Equipment
img
Consumer Electronics
img
Industrial Control
img
Medical Devices
Contact Us If Have Any Question

You can either contact us via phone, email or online form below. Our specialist will contact you back shortly.

Contact now!